Flashing Andoid SPD android cam be done using different flash tools depending on the firmware structure(file type). SPD firmware in the PAC format can be flashed using ResearchDownload/ResearchUpgrade. On the other hand, for bin stock roms, you cannot flash with ReasearchUpgrade tool. The suitable tool for flashing bin stock roms among many is miracle box. In this tutorial, we will thus be guididng you on how to flash bin stock roms using miracle box.
Flashing Android SPD android cam is done using different flash tools depending on the firmware structure(file type). SPD firmware in the PAC format can be flashed using ResearchDownload/ResearchUpgrade. On the other hand, for bin stock roms, you cannot flash with ReasearchUpgrade tool. The suitable tool for flashing bin stock roms among many is the miracle box.
In this tutorial, we will thus be guiding you on how to flash bin stock roms using the miracle box.
To flash your Android or feature phone using Miracle Box, you will need to follow the steps below.
Requirements
- Stock bin file of the device in question
- Spd USB drivers
- Miracle box 2.27A crack
- A USB cable
- A pc or laptop
- The device to be flashed.
You may also like: How to backup spd firmware with Miracle box
STEPS TO FOLLOW
- Start by downloading and installing spd USB drivers into your computer.
- Next extract the Miracle box you downloaded from the link above and run the loader.
- Once in the Miracle Box dashboard, click on the SPD TAB and check "Write" to write flash.
- Next under "Chose type", select the boot type of your spd device. Yo can do that before starting the flashing by using the "Read info" option(instead of "write" you check "Read info", hit the start button and connect the phone to pc).
- After the above step, click on the folder icon below the boot option dropdown menu to locate and load bin stock rom.
- Once bin stock rom is loaded, hit the start button, then connect your device while holding the boot key to the pc via USB. Your device(spd) should be off with the battery inserted. Boot key can be vol-, vol+ or the key above the call button in feature phones.
- Once your phone is connected, the flashing should begin.
- Just wait for completion. You will see "Write complete"
And there you go..
COMMENTS