how to flash a spreadtrum android
Similar articles
The flashing of spreadtrum devices is different from mtk devices and require a different flash tool;- ResearchDownload.
For you to flash your spd devices, you will need to follow the steps below;
For you to flash your spd devices, you will need to follow the steps below;
Requirements:
- SPD USB DRIVERS
- A LAPTOP OR PC
- A USB CABLE
- ANDROID SPD FLASH TOOL;- ResearchDownload
PROCEDURE:
- Download and install spreadtrum usb drivers from the link below.
- Download the specific rom for your spd device and extract Check here for available roms here. The spd firmware file to be loaded with the flash tool is a PAC FILE
- Now download and install Research download from the link given below. Extract it and click on ResearchDownload.exe as on the screenshot below
- Execute and then load your .pac file by clicking on (1), then validate on (2) to start the flashing as indicated below. To connect your device via usb cable to your pc, you wil have to press a boot key; either the volume up or down key.
- Once your devices detected and connected, you will see this;
- This indicates the flashing process is proceeding. Once finished, you are going to see this;
- Congrats!!!, you have successfully flashed your phone.
DOWNLOADS
SPD FLASH TOOL Get SPD Flash Tool R2.9.6004 HERE
USB DRIVERS FOR SPD ANDROIDS CLICK HERE
COMMENTS